Warning: Last items in stock!
Sales of Furman AR-1215 AC line voltage regulators, intended to protect audio, video, computer and other electronic equipment. DISCONTINUED
DISCONTINUED - Replaced by M8 X AR
The 15 amp AR-1215 AC Line Voltage Regulator is intended to protect audio, video, computer and other electronic equipment from problems caused by AC line voltage irregularities-sags, brownouts, or overvoltages that can cause sensitive digital equipment to malfunction, or, in extreme cases, to sustain damage.
The AR-1215 is designed to provide a steady, stable 120 VAC output. It accepts any input voltage from 97V to 141V and transforms it to a constant 120V, ±5V. Voltages beyond that range may also be converted to usable levels, depending on how far out of range they are. The AR-1215 can handle loads totaling up to 15 amps as long as the input voltage is above 124 volts. For voltages below that level, its capacity must be derated at approximately .15 ampere per volt.
The AR-1215 has been designed specifically with the unique needs of audio and video in mind. Its technology differs from that of computer-oriented voltage regulators in many important ways. For example:
The AR-1215 does not use a ferro-resonant transformer, which would be heavy and bulky, radiate a large magnetic field, and be too frequency-sensitive to be usable with generators. Instead, it uses a use a design based on an eight-tap toroidal autoformer. The toroidal design assures minimal leakage of stray magnetic fields.
The AR-1215 circuitry monitors the incoming line voltage with each cycle, comparing it to an extremely precise voltage reference, accurate to ±0.15%. If a voltage fluctuation requires that a different tap be selected, the new tap is electronically switched exactly at the zero-crossing, to avoid distorting the AC waveform. (Most commercial voltage regulators using multiple-tapped transformers switch taps at uncontrolled times, thereby creating voltage spikes, and often creating clicks that can leak into the audio.) Hysteresis of 1.5V in the switching circuits avoids "chatter." The design is not sensitive to small errors in line frequency, making them ideal for use with generators.
The AR-1215 also features power conditioning that is truly in a class by itself, thanks to the quantity, quality and configuration of the overvoltage suppression devices used. These include MOV's, high voltage inductors and capacitors, and precise high-inrush magnetic circuit breakers. This unique combination can safely divert large spikes as well as filter audible high frequency noise.
An additional feature, Extreme Voltage Shutdown, senses dangerously high or low voltages and shuts down the output before any damage is done. The output remains off until the overvoltage or undervoltage is removed, with an LED indicating the shutdown condition. This invaluable feature provides positive protection to your equipment from accidental connection to incorrect line voltages (for example, 220V when 120V is expected-- a not uncommon hazard in the entertainment industries.)
The AR-1215 has eight outlets on the rear panel, and one on the front panel. All outlets are regulated, spike-suppressed, and filtered against RFI with a 3-pole filter. There are no controls except the circuit breaker/on-off switch. A bar-graph meter comprised of 10 LED's indicates input voltage, while another LED indicates "In Regulation" status (i.e., that the output voltage is within ±5V of 120V.) The unit is housed in a compact, single-space rack-mount chassis, 1.75" high and 8" deep (8.9 x 43.2 cm) and weighs only 12 lbs. (5 kg).
For more info, visit the Furman website: FurmanSound.com
No customer comments for the moment.
Sales of Furman M-8DX power
Sales of Furman M-8DX power conditioners, designed for use in many pro audio applications.
Sales of Furman ACD-100 power
Sales of Furman ACD-100 power distros, ideal for touring PA systems, touring musical and theatrical acts, mobile recording and more. DISCONTINUED
Sales of Furman PST-6 power
Sales of Furman PST-6 power conditioners, delivering pure AC power and comprehensive protection in an aluminum chassis.
Sales of Furman SS-6B professional
Sales of Furman SS-6B professional surge supressor outlets for stage and studio use.
Sales of Furman PST-2+6 power
Sales of Furman PST-2+6 power conditioners, delivering pure AC power and comprehensive protection.
Furman P-1800 PF power
Furman P-1800 PF power conditioners/surge suppressors, engineered specifically for use with instrument amplifiers and other high-current equipment. DISCONTINUED
Grimm Audio MP1 premium power
Grimm Audio MP1 premium power supplies for tube microphones.
Meyer Sound MDM-5000 is a 3 phase
Meyer Sound MDM-5000 is a 3 phase distribution module which provides convenient and flexible routing of up to six channels of audio, AC power and RMS to Meyer Sound loudspeaker systems
The Meyer Sound MDM-832 distribution
The Meyer Sound MDM-832 distribution module routes up to eight channels of AC power, balanced audio, and RMS™ to multiple Meyer Sound loudspeakers, further enhancing portability and ease of use for self-powered stage monitors and loudspeakers with low to moderate current draw.