DISCONTINUED - Replaced by the DBX 234XS
Taking a look at the construction features of the dbx® 234 XL, at first glance you'll notice the units are great looking, and as you turn the controls something else becomes apparent; these units are extremely well built. The controls exude great precision, and the feel is a solid "click". Also, when you open the box, you won't find the external power supply that accompanies most processors in this price range. That's because we know how difficult external powersupplies can be to work with and even though it costs a little more we put the high quality power supply right in the unit. All the inputs and outputs are TRS differentially balanced 1/4" jacks that are bolted down to the chassis. This "nutting down" of the jacks insures that even if someone steps on a cable plugged into the unit, it's not going to tear up the circuit board inside. All dbx® crossovers feature Linkwitz-Riley 24 dB per octave filters, the professional standard, but then again, what did you expect?
Via two switches on the back panel you will first select whether you're operating your system in stereo 2-way, 3-way or mono 4-way. Another back panel switch also selects whether or not you want to mono sum the LF (subwoofer) out. (Most systems that use a subwoofer are mono subbed to take advantage of amplifier power and because low frequencies are non-directional.) Back panel switches allow you to select the range of the crossover frequencies individually for both channels. The crossover frequency controls have a green LED that indicates the X10 switch on the back panel is activated (we wouldn't make you check the switch position on the back every time you wonder where it's set). All these switches are on the back panel because it could be disastrous if you were to change them mid-program. On the front panel you'll notice there are LEDs that indicate whether the unit is in mono or stereo mode. Each channel has an input gain control for proper level setting. There's a recessed 40 Hz low cut (HPF) on each channel to remove unwanted low frequencies. Both the low and high outputs on each channel have a gain control ranging from - to +6 dB, to allow muting of individual outputs and for level matching. Also, these outputs each have phase reverse switches that'll help get you out of a bind without having to reconfigure your system. These phase reverse switches may be internally reconfigured as mute switches.
You'll get great performance, all the features you'd expect from a professional product, and the knowledge that you're buying a processor from the people that have been producing the world's finest processors for over 20 years. The technology that made us famous brings you a dbx® crossover which has been tested to the highest professional standards at a price that's just too low to admit.
For more information, visit the DBX website: 234XL Stereo 2/3 Way, Mono 4-Way Crossover
No customer comments for the moment.
Sales of DBX 131 single channel
Sales of DBX 131 single channel 31-band graphic equalizers, designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. Discontinued
Klark Teknik DN9331 is 31 band
Klark Teknik DN9331 is 31 band motorized fader graphic controller.
Klark Teknik DN370 is a dual band,
Klark Teknik DN370 is a dual band, 1/3 octave analogue graphic equalizer with enhanced proportional-Q response and four band filtering.
Klark Teknik DN360 is a dual 30
Klark Teknik DN360 is a dual 30 band, 1/3 octave analogue graphic equalizer with classic proportional-Q response and configured pin 3 hot.
Drawmer S3 Stereo three band tube
Drawmer S3 Stereo three band tube compressors incorporate the very latest in Ivor Drawmer designs.
Drawmer S2 compressors offer an "all
Drawmer S2 compressors offer an "all tube - no technical compromise" circuit using only the highest grade components.
Drawmer DA 6 balanced distribution
Drawmer DA 6 balanced distribution amplifiers are designed to be used anywhere high quality audio has to be distributed to a number of locations down long cable runs.
Drawmer 1968 MKII compressors put a
Drawmer 1968 MKII compressors put a level of performance in your rack that is beyond your expectations.
Drawmer 1960 compressors provide the
Drawmer 1960 compressors provide the ultimate direct interface between the sound source and the recording medium.
Drawmer DS501 power gates
Drawmer DS501 power gates incorporate a number of features pioneered by Drawmer, which are not found on conventional noise gates.
Drawmer DS404 quad noise gates are
Drawmer DS404 quad noise gates are designed to the highest specification to complement the DS201 Dual Noise Gate.
Drawmer DL241 compressors are
Drawmer DL241 compressors are designed for a vast range of broadcast, sound reinforcement, and recording applications.
Drawmer DS201 dual noise gates are
Drawmer DS201 dual noise gates are capable of truly creative studio trickery.
Drawmer DL441 compressor/limiters
Drawmer DL441 compressor/limiters capture four channels of Drawmer's innovative DL241 'Auto Compressor' in only 1U of rack space.
Drawmer DL251 compressors are
Drawmer DL251 compressors are designed to restore the high frequency energy lost during the full band compression process.