Availability:This product is no longer in stock
Warning: Last items in stock!
Sales of BSS FDS-366T Onmidrive Compact Plus loudspeaker management processors, with 3 inputs and 6 outputs designed to satisfy all of your system requirements.
The one loudspeaker management system that really satisfies all your system requirements just got even better!. New V2.0 firmware introduces the first pro audio implementation of WHISEWORKS - NTMT* filter technology, which means that you can take your loudspeakers closer to their operating bandwidths without fear of over-excursion.
One FDS-366 can drive a true stereo 3-way system, or 3 bi-amp outputs for monitors. Add more units and MIDI slave linking to make stereo 4, 5 and even 6-way systems.
WHISEWORKS - *NTM™ and WHISEWORKS - Neville Thiele Method are trademarks of Precision Audio Pty.Ltd
"The new filters allow me to put more power to the devices without fear of overload or over-excursion. Once adjusted, sounds better than standard filters. The system seemed louder and clearer. We were setting off alarms in the car park!" - Ferrit, Promix/Electrotec, Las Vegas, Nevada, USA
Other applications are also satisfied, such as zoning to six discrete areas using full range or band-restricted outputs. As a mono sum of all three inputs is available, the FDS-366 will find favor with LCR post-production monitoring systems where a mono sub output is required. A stereo AES/EBU digital input also means that the FDS-366 is an ideal product for studio monitoring applications.
BSS have incorporated the very latest digital technology and DSP algorithms to provide the Compact Plus with a truly astonishing audio performance. The latest generation of 24-bit converters with carefully engineered support electronics provides a dynamic range in excess of 112dB (unweighted) without employing 'massaging' techniques that could have side effects.
Using a 96kHz sample rate further enhances the sonic performance of the FDS-366. The advantages of this higher rate mean a more natural and open sound thanks to a 40kHz bandwidth and improved filter responses that are possible with the higher Nyquist frequency.
BSS Audio pioneered the use of dynamic equalization on the DPR-901, a tool well known to engineers the world over. Essentially a way of compressing selected frequencies when the signal reaches a pre-set threshold, adding dynamic eq to every input and output on the FDS-366 provides the engineer with a way to control some of the non-linearities in drivers (such as 2" horns) and room resonance's.
Two new facilities, the 'Alignment Assistant' and Dynamic EQ, help to reduce setup time and enhance creativity.
The effects of non-identical delays between loudspeaker drivers in cabinets, and between cabinets are well known. The FDS-366's Alignment Assistant makes the calculation and implementation of driver delay settings quick and automatic. A microphone input directly measures and corrects for driver and cabinet displacement, and also takes into account inherent phase shifts present in these and other system elements.
More information from BSS site: BSS AudioFDS-366T
No customer comments for the moment.
Sales of DBX 131 single channel
Sales of DBX 131 single channel 31-band graphic equalizers, designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. Discontinued
Klark Teknik DN9331 is 31 band
Klark Teknik DN9331 is 31 band motorized fader graphic controller.
Klark Teknik DN370 is a dual band,
Klark Teknik DN370 is a dual band, 1/3 octave analogue graphic equalizer with enhanced proportional-Q response and four band filtering.
Klark Teknik DN360 is a dual 30
Klark Teknik DN360 is a dual 30 band, 1/3 octave analogue graphic equalizer with classic proportional-Q response and configured pin 3 hot.
Drawmer S3 Stereo three band tube
Drawmer S3 Stereo three band tube compressors incorporate the very latest in Ivor Drawmer designs.
Drawmer S2 compressors offer an "all
Drawmer S2 compressors offer an "all tube - no technical compromise" circuit using only the highest grade components.
Drawmer DA 6 balanced distribution
Drawmer DA 6 balanced distribution amplifiers are designed to be used anywhere high quality audio has to be distributed to a number of locations down long cable runs.
Drawmer 1968 MKII compressors put a
Drawmer 1968 MKII compressors put a level of performance in your rack that is beyond your expectations.
Drawmer 1960 compressors provide the
Drawmer 1960 compressors provide the ultimate direct interface between the sound source and the recording medium.
Drawmer DS501 power gates
Drawmer DS501 power gates incorporate a number of features pioneered by Drawmer, which are not found on conventional noise gates.
Drawmer DS404 quad noise gates are
Drawmer DS404 quad noise gates are designed to the highest specification to complement the DS201 Dual Noise Gate.
Drawmer DL241 compressors are
Drawmer DL241 compressors are designed for a vast range of broadcast, sound reinforcement, and recording applications.
Drawmer DS201 dual noise gates are
Drawmer DS201 dual noise gates are capable of truly creative studio trickery.
Drawmer DL441 compressor/limiters
Drawmer DL441 compressor/limiters capture four channels of Drawmer's innovative DL241 'Auto Compressor' in only 1U of rack space.
Drawmer DL251 compressors are
Drawmer DL251 compressors are designed to restore the high frequency energy lost during the full band compression process.