Warning: Last items in stock!
DBX 1046 quad compressor/limiters provide 4 channels of compression for a variety of applications.
In today's recording and sound reinforcement environments, the need for multiple channels of high quality and easy to use compression is growing rapidly. The new dbx® 1046 is designed to provide the audio professional with just that: 4 channels of great sounding dbx compression for a variety of applications. Incorporating the industry standard dbx designs and the latest available manufacturing techniques, the dbx 1046 provides pristine sonic quality with that classic dbx sound.
The 1046 provides 4 channels of smooth classic dbx OverEasy® or Hard Knee compression that are perfectly suited for use on individual tracks of your multitrack recorder, and in virtually all applications the separate channels can be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus™ is ideal for protecting your system from the oppressive peaks that can take out valuable drivers in your sound reinforcement rig or studio monitors.
All four channels have the following controls:
Threshold - allows you to set the level at which the compressor starts affecting the gain
OverEasy - allows you to select between soft compression for overall gain control or Hard Knee compression based on the characteristics of the original dbx 160.
Ratio - allows you to set the slope of gain reduction affecting the signal over the threshold level.
Input/Output Meter - allows you to set the meter to check the input and output levels for maximum signal-to-noise ratio and best level matching.
Output Gain - allows you to add make-up gain or to adjust the output level for that channel to match the next device's input gain.
Bypass - hard wire bypass allows you to hear how the compressor is affecting your signal.
PeakStopPlus - allows you to set the maximum signal level you want to pass through this channel. While it's virtually impossible to eliminate distortion, the PeakStopPlus circuit does it gracefully and effectively with minimal distortion.
Stereo Link - allows you to link channels 1&2 and 3&4 for two channels of true stereo compression.
All four channels feature balanced gold plated XLR and 1/4" inputs and outputs, and switchable +4dBu or -10dBV operating level to interface each individual channel with any other device.
So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx 1046 is for you.
For more information, visit the DBX website: 1046 Quad Compressor Limiter
No customer comments for the moment.
Sales of DBX 131 single channel
Sales of DBX 131 single channel 31-band graphic equalizers, designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. Discontinued
Klark Teknik DN9331 is 31 band
Klark Teknik DN9331 is 31 band motorized fader graphic controller.
Klark Teknik DN370 is a dual band,
Klark Teknik DN370 is a dual band, 1/3 octave analogue graphic equalizer with enhanced proportional-Q response and four band filtering.
Klark Teknik DN360 is a dual 30
Klark Teknik DN360 is a dual 30 band, 1/3 octave analogue graphic equalizer with classic proportional-Q response and configured pin 3 hot.
Drawmer S3 Stereo three band tube
Drawmer S3 Stereo three band tube compressors incorporate the very latest in Ivor Drawmer designs.
Drawmer S2 compressors offer an "all
Drawmer S2 compressors offer an "all tube - no technical compromise" circuit using only the highest grade components.
Drawmer DA 6 balanced distribution
Drawmer DA 6 balanced distribution amplifiers are designed to be used anywhere high quality audio has to be distributed to a number of locations down long cable runs.
Drawmer 1968 MKII compressors put a
Drawmer 1968 MKII compressors put a level of performance in your rack that is beyond your expectations.
Drawmer 1960 compressors provide the
Drawmer 1960 compressors provide the ultimate direct interface between the sound source and the recording medium.
Drawmer DS501 power gates
Drawmer DS501 power gates incorporate a number of features pioneered by Drawmer, which are not found on conventional noise gates.
Drawmer DS404 quad noise gates are
Drawmer DS404 quad noise gates are designed to the highest specification to complement the DS201 Dual Noise Gate.
Drawmer DL241 compressors are
Drawmer DL241 compressors are designed for a vast range of broadcast, sound reinforcement, and recording applications.
Drawmer DS201 dual noise gates are
Drawmer DS201 dual noise gates are capable of truly creative studio trickery.
Drawmer DL441 compressor/limiters
Drawmer DL441 compressor/limiters capture four channels of Drawmer's innovative DL241 'Auto Compressor' in only 1U of rack space.
Drawmer DL251 compressors are
Drawmer DL251 compressors are designed to restore the high frequency energy lost during the full band compression process.