Warning: Last items in stock!
DBX 1074 quad gates offer 4 channels of gating with threshold, depth and release controls on each channel.
The latest addition to the 10 Series product line, the dbx® 1074 QuadGate™, is the perfect companion to the 1066 and 1046. The 1074 offers 4 channels of gating with threshold, depth and release controls on each channel. The 1074 is based on the legendary dbx V2 VCA and offers XLR inputs and outputs, and 1/4” side-chain input. In addition to an external key input per channel, the 1074 also has an internal filter that can be independently activated and controlled on a channel-per-channel basis. This filter allows the 1074 to not only clean up tracks, but gives you frequency selective control on each gate, to open exactly when you want it to. These features combined, make the 1074 an absolute must for those who require quad gating on applications including: Gating dry and percussive sounds such as snare drum and kick drum,gating sounds that have longer decay times such as cymbals and Pianos, gating hum or buzz from live instruments or recorded tracks or eliminating Headphone leakage into microphones. Gating instrument microphones to eliminate amplifier bleed.
From the company that has been redefining the standard of signal processing for more than 30 years, dbx® Professional Products comes a bulletproof product that caters to the scrutinizing needs of those who require the precision noise gating capabilities. Once again, the engineering staff at dbx® Professional Products have taken technology that has been over three decades in the making and have created a product that is flexible, versatile and rock solid in construction design. The 1074’s independent channel design with key filtering capabilities make it the perfect tool for countless applications.
For more information, visit the DBX website: 1074 Quad Gate
No customer comments for the moment.
Sales of DBX 131 single channel
Sales of DBX 131 single channel 31-band graphic equalizers, designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. Discontinued
Klark Teknik DN9331 is 31 band
Klark Teknik DN9331 is 31 band motorized fader graphic controller.
Klark Teknik DN370 is a dual band,
Klark Teknik DN370 is a dual band, 1/3 octave analogue graphic equalizer with enhanced proportional-Q response and four band filtering.
Klark Teknik DN360 is a dual 30
Klark Teknik DN360 is a dual 30 band, 1/3 octave analogue graphic equalizer with classic proportional-Q response and configured pin 3 hot.
Drawmer S3 Stereo three band tube
Drawmer S3 Stereo three band tube compressors incorporate the very latest in Ivor Drawmer designs.
Drawmer S2 compressors offer an "all
Drawmer S2 compressors offer an "all tube - no technical compromise" circuit using only the highest grade components.
Drawmer DA 6 balanced distribution
Drawmer DA 6 balanced distribution amplifiers are designed to be used anywhere high quality audio has to be distributed to a number of locations down long cable runs.
Drawmer 1968 MKII compressors put a
Drawmer 1968 MKII compressors put a level of performance in your rack that is beyond your expectations.
Drawmer 1960 compressors provide the
Drawmer 1960 compressors provide the ultimate direct interface between the sound source and the recording medium.
Drawmer DS501 power gates
Drawmer DS501 power gates incorporate a number of features pioneered by Drawmer, which are not found on conventional noise gates.
Drawmer DS404 quad noise gates are
Drawmer DS404 quad noise gates are designed to the highest specification to complement the DS201 Dual Noise Gate.
Drawmer DL241 compressors are
Drawmer DL241 compressors are designed for a vast range of broadcast, sound reinforcement, and recording applications.
Drawmer DS201 dual noise gates are
Drawmer DS201 dual noise gates are capable of truly creative studio trickery.
Drawmer DL441 compressor/limiters
Drawmer DL441 compressor/limiters capture four channels of Drawmer's innovative DL241 'Auto Compressor' in only 1U of rack space.
Drawmer DL251 compressors are
Drawmer DL251 compressors are designed to restore the high frequency energy lost during the full band compression process.