Get the lowest prices right now by calling
877 258-0563 or 303 258-0563



RME ADI-4 DD

New

RME ADI-4 DD 24 Bit / 96 kHz, 8-channel AES/EBU ADAT converters are a perfect interface solution in all areas, from home user up to broadcast applications.

Contact Sweetwave

 

RMEs ADI-4 DD is a highly cost-efficient AES to ADAT and ADAT to AES converter. Support for up to 96 kHz and a built-in jitter suppression are just two of several outstanding features.

The device basically consists of two converters: four AES-3 inputs to double ADAT outputs, and double ADAT inputs to four AES-3 outputs. The double ADAT ports enable full 8 channel support, from 32 kHz up to 96 kHz (S/MUX). The unit provides one XLR I/O directly. A DB-25 connector allows for a use of industry standard AES-3 I/O breakout cables. Setting an internal connector easily changes the DB-25 connector to meet the pinout of Tascam (Digidesign), Yamaha and Euphonix cables.

Application examples:

  • AES/EBU frontend for RME's digital I/O cards (ADAT optical I/O)
  • Serves as 8-Channel AES and ADAT I/O for all digital mixing desks with ADAT or AES ports
  • Allows to operate up to 4 SPDIF or AES devices
  • Converts between AES-3, SPDIF and SPDIF optical
  • Removes jitter from AES-3 and ADAT signals

Conversion modes (selection):

  • 8-Channel AES to ADAT optical converter (96 kHz)
  • 2-Channel AES to 8-Channel ADAT splitter (96 kHz)
  • 8-Channel ADAT to AES converter (96 kHz)
  • 2-Channel AES to 8-Channel AES splitter (96 kHz)
  • 4-Channel AES Double Wire to AES Single Wire converter (96 kHz)
  • 4-Channel AES Single Wire to AES Double Wire converter (96 kHz)

 

All in all the ADI-4 DD shows an unsurpassed flexibility together with a sensational price point. It is a perfect interface solution in all areas, from home user up to broadcast applications.

Tech Specs

Input AES/EBU: 1 x XLR, 4 x via DB-25 connector, electrically isolated, highly sensitive input stage (< 0.3 Vpp), SPDIF compatible

Output AES/EBU: 1 x XLR, 4 x via DB-25 connector, transformer balanced, 5 Vpp

SPDIF Optical: Second ADAT port can be switched to serve as SPDIF I/O

Input ADAT® optical 2 x TOSLINK, 24-Bit, Bitclock PLL

Output ADAT® optical: 2 x TOSLINK, 24-Bit

Input word clock: BNC, Signal Adaptation Circuit (functional from 1.2 Vpp input signal)

Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof

Sync sources: ADAT optical, AES/EBU, word clock

Varipitch: by input signal or word clock

Sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable (Sync/word clock)

Sample rate range: AES, word clock: 27 kHz-105 kHz, ADAT 33 kHz - 57 kHz

Jitter: Internal clock < 1 ns, word clock In < 2 ns, ADAT In < 2 ns

Jitter sensitivity: all PLLs operate even at 100 ns Jitter without problems

Jitter suppression: circa 30 dB (2.4 kHz)

Power Supply: Operates with voltages ranging from 7-30V DC oder AC, allowing operation with practically any power source, including batteries

External high-quality switching power supply included, for worldwide operation at 100-240 Volt

Dimensions: 215 x 44 x 100 mm

More Info
RME: ADI-4 DD 

No customer comments for the moment.

Write a review

RME ADI-4 DD

RME ADI-4 DD

RME ADI-4 DD 24 Bit / 96 kHz, 8-channel AES/EBU ADAT converters are a perfect interface solution in all areas, from home user up to broadcast applications.

Write a review



McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams Trusted Commerce Member of infoComm InternationalProud member of NAMM
Scroll