Warning: Last items in stock!
Meyer Sound 700-HP ultrahigh-power subwoofers are offered with or without rigging.
DISCONTINUED - PAGE LEFT FOR REFERENCE
Features and Benefits of the Meyer Sound 700-HP
The Meyer Sound 700-HP ultrahigh-power subwoofer sets a new standard for the power-to-size equation. The 700-HP's power and bandwidth handle high continuous operating levels and extreme transient information with minimal distortion in its operating frequency range.
Meyer Sound's rigorous design approach has been applied to extract the greatest efficiency from every part of the system, resulting in the 700-HP's effortless reproduction of low frequency transient information. As a self-powered system, the transducers, amplification and control electronics of the 700-HP are created as a symbiotic system that optimizes performance and maximizes its tremendous power.
The operating frequency range of 28 Hz to 150 Hz complements other Meyer Sound loudspeakers and line and curvilinear arrays in sound reinforcement applications requiring maximum headroom at the low end of the frequency spectrum.
The 700-HP's efficiently tuned cabinet houses two Meyer Sound-designed and -manufactured back-vented, long-excursion, 18-inch cone drivers. Each driver has a 4-inch voice coil and is rated to handle 1200 AES watts. The drivers have also been engineered for extreme efficiency, using high-gauss neodymium magnets for the most powerful magnetic field strength. High magnetic field strength increases the driver's sensitivity, which yields greater output, while keeping heat dissipation requirements within operational tolerances.
An integral two-channel class AB/H amplifier with complementary MOSFET output stages supplies total peak power of 2250 watts (1125 watts per channel). With twice the amplifier power of the 650-P subwoofer, the 700-HP produces an average of 3 dB more overall SPL, with enormous headroom to accommodate the most extreme demands with ease. Recent tests conducted by Meyer Sound show the 700-HP producing significantly higher output than other"high-power" subwoofers.
The amplifier, control electronics and power supply are integrated into a single, field-replaceable module mounted in the rear of the cabinet. The cabinet is constructed of multi-ply hardwood and coated with a textured black finish. Integral metal grills lined with acoustical black mesh protect the cone drivers. Designed mainly for stage or ground placement, the stackable 700-HP includes plastic skids on the bottom of the unit, preventing damage to the enclosure or the unit below. The skids align with slots on the cabinet's upper surfaces ensuring secure, aligned stacking. For maximum convenience in touring situations, the 700-HP can even travel in stacks on the MCF-700 caster frame.
The Meyer Sound 700HP is truck-smart, with exterior cabinet dimensions suitable for both European and US truck widths. An optional QuickFly rigging kit is available, installed at the factory or as a field upgrade. Up to 10 cabinets can be suspended from the optional MTG-700 top grid in a straight hang at a 7:1 safety factor.
Options available for the Meyer 700HP include weather protection and finishes in custom colors for fixed installations and other situations requiring specific cosmetics.
An optional RMS remote monitoring system module allows comprehensive monitoring of all key system parameters on any RMS-equipped host PC. In addition, Meyer Sound's MAPP Online multipurpose acoustical prediction program allows quick prediction of coverage, frequency response, impulse response and maximum output of the 700-HP and other Meyer Sound loudspeakers and loudspeaker systems.
Contact us for our lowest Meyer Sound 700HP Price!
No customer comments for the moment.
JBL VT4889-1 15 inch three-way line
JBL VT4889-1 15 inch three-way line array elements, designed to deliver high-quality reinforcement of music and speech in a variety of applications.
JBL VT4889ADP full-size powered
JBL VT4889ADP full-size powered three-way, high directivity line array elements and integrated audio systems.
JBL VT4880ADP powered fullsize
JBL VT4880ADP powered fullsize arrayable 2x 18-inch subwoofers are designed to deliver high quality reinforcement of VLF musical information.
JBL SRX718S 18 inch subwoofers, for
JBL SRX718S 18 inch subwoofers, for extended low-frequency output. DISCONTINUED
Sales of JBL SRX728S dual 18 inch
Sales of JBL SRX728S dual 18 inch woofers for extended low frequency output. Large vent area for reduced distortion. DISCONTINUED
Sales of JBL SRX738 18 inch
Sales of JBL SRX738 18 inch low-frequency drivers for extended low-frequency output. DISCONTINUED
Active subwoofers designed for
Active subwoofers designed for monitoring environments requiring an accurate low-frequency response down to 20Hz.
Meyer Sound CQ-1 wide coverage main
Meyer Sound CQ-1 wide coverage main loudspeakers, offering precise, low-Q coverage. Arrayable and THX approved. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound CQ-2 narrow coverage
Meyer Sound CQ-2 narrow coverage main loudspeakers are arrayable with precise, high-Q coverage. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound 650-P high-power
Meyer Sound 650-P high-power subwoofers provide extended low-frequency power bandwidth. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound MM-10 miniature
Meyer Sound MM-10 miniature subwoofers deliver expanded low-frequency headroom for applications that require excellent audio quality from a compact cabinet.
Meyer Sound MM-4XP self-powered
Meyer Sound MM-4XP self-powered miniature loudspeakers are designed for high-quality distributed systems.
Meyer Sound MM-4XPD directional
Meyer Sound MM-4XPD directional miniature self-powered loudspeakers are designed for high-quality distributed systems in highly reverberant spaces.
Meyer Sound MPS-481 48V DC power
Meyer Sound MPS-481 48V DC power supplies provide DC power for a single MM-4XP loudspeaker.
Meyer Sound MPS-488 external power
Meyer Sound MPS-488 external power supplies deliver 48V of DC power and balanced audio for up to eight MM-4XP loudspeakers.
Meyer Sound Stella-4C installation
Meyer Sound Stella-4C installation loudspeakers for use in Meyer Sound’s Constellation electroacoustic architecture.
Meyer Sound 600-HP compact
Meyer Sound 600-HP compact high-power subwoofers are available with or without handles, rigging, and RMS. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound Stella-8C installation
Meyer Sound Stella-8C installation loudspeakers for use in Meyer’s Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound Stella-188 18V DC power
Meyer Sound Stella-188 18V DC power supplies for use in Meyer's Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound SB-1 parabolic
Meyer Sound SB-1 parabolic long-throw sound beam speakers focus high-frequency fill energy over great distances.
Meyer Sound SB-2 parabolic
Meyer Sound SB-2 parabolic wide-range sound beam speakers are capable of high sound pressure levels with precisely defined narrow coverage.
Meyer Sound SB-3F sound field
Meyer Sound SB-3F sound field systhesis loudspeakers are designed for projecting mid- and high-frequency energy over distances up to 1km.
Meyer Sound UP-4XP ultracompact
Meyer Sound UP-4XP ultracompact loudspeakers deliver high sound pressure levels, low distortion, and uniform directional control.
Meyer Sound 500-HP self-powered
Meyer Sound 500-HP self-powered subwoofers are designed to enhance the low-frequency headroom in a variety of full-range systems for fixed or touring applications.
Sales of Meyer Sound UPQ-1P
Sales of Meyer Sound UPQ-1P self-powered, wide coverage loudspeakers with symmetrical patterns that cover broad listening areas.
Sales of Meyer Sound UPQ-2P narrow
Sales of Meyer Sound UPQ-2P narrow coverage loudspeakers, offering extremely high power output and low distortion, as well as a focused beamwidth.
Meyer Sound UPA-1P compact wide
Meyer Sound UPA-1P compact wide coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.
Meyer Sound UPJunior ultracompact
Meyer Sound UPJunior ultracompact loudspeakers bring the sonic signature, flexibility, and extraordinary power-to-size ratio of the UPJ-1P to a smaller package.
Meyer Sound UPA-2P compact narrow
Meyer Sound UPA-2P compact narrow coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.
Meyer Sound MJF-212A high-power
Meyer Sound MJF-212A high-power stage monitors are designed to meet critical requirements in professional applications.