#
New
Availability:
Warning: Last items in stock!
Availability date:
Meyer Sound UP-4XP ultracompact loudspeakers deliver high sound pressure levels, low distortion, and uniform directional control.
Features and Benefits of the Meyer Sound UP-4XP
The UP-4XP ultracompact loudspeaker is ideally suited for applications requiring a small, inconspicuous cabinet that also delivers high sound pressure levels, low distortion, and uniform directional control. The self-powered UP-4XP offers exceptional audio performance in a compact package with the advantages of a remote power supply. As a standalone loudspeaker, the UP-4XP can be used for vocal reinforcement, frontfill coverage, and delay coverage for under-balcony applications. The UP-4XP can also be paired with an optional subwoofer to create a full-range system.
The UP-4XP boasts a wide operating frequency range of 85 Hz to 18 kHz and a conservatively rated maximum peak SPL of 119 dB, with very low distortion. The unit's high-frequency section includes a 1-inch metal dome tweeter on a constant-directivity, high- frequency horn with a 100-degree beamwidth. The low/mid-frequency section includes two 4-inch cone transducers that work in parallel at low frequencies — delivering a combined acoustic output — with one of the drivers rolling off at higher frequencies to prevent interference (due to comb filtering effects) in the crossover region. The proprietary UP-4XP drivers, which are manufactured at Meyer Sound's factory in Berkeley, California, are powered by three channels of onboard power amplification that include an active crossover, voltage limiters, and frequency and phase correction circuitry.
Balanced audio and DC power are received by the UP-4XP from a single 5-pin Phoenix connector on its rear panel. Powering the unit from an external source eliminates the need for wiring conduits while still preserving the advantages of self-powered systems. The UP-4XP's amplifier and signal- processing circuits are designed to store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs. UP-4XP loudspeaker systems require an MPS-488 external power supply. The rack mount multi-channel power supply can deliver both balanced audio and 48 V of DC power to four UP-4XP loudspeakers at cable lengths of up to 150 feet, with just 1 dB of loss in peak SPL using 18 AWG wire. The use of composite multiconductor cables (such as Belden® 1502) allows a single cable to carry both audio and DC power to the UP-4XPs. Longer cable lengths are possible for moderate applications that don't drive the loudspeakers to maximum output, or when using heavier wire gauges for the DC power.
Other options include weather protection and custom color finishes for installations and applications with specific cosmetic requirements. The optional MUB-UP4 U-bracket mounts the loudspeaker on walls and ceilings at adjustable angles.
More Info
UP-4XP : UltraCompact Loudspeaker
No customer comments for the moment.
JBL VT4889-1 15 inch three-way line
JBL VT4889-1 15 inch three-way line array elements, designed to deliver high-quality reinforcement of music and speech in a variety of applications.
JBL VT4889ADP full-size powered
JBL VT4889ADP full-size powered three-way, high directivity line array elements and integrated audio systems.
JBL VT4880ADP powered fullsize
JBL VT4880ADP powered fullsize arrayable 2x 18-inch subwoofers are designed to deliver high quality reinforcement of VLF musical information.
JBL SRX718S 18 inch subwoofers, for
JBL SRX718S 18 inch subwoofers, for extended low-frequency output. DISCONTINUED
Sales of JBL SRX728S dual 18 inch
Sales of JBL SRX728S dual 18 inch woofers for extended low frequency output. Large vent area for reduced distortion. DISCONTINUED
Sales of JBL SRX738 18 inch
Sales of JBL SRX738 18 inch low-frequency drivers for extended low-frequency output. DISCONTINUED
Active subwoofers designed for
Active subwoofers designed for monitoring environments requiring an accurate low-frequency response down to 20Hz.
Meyer Sound CQ-1 wide coverage main
Meyer Sound CQ-1 wide coverage main loudspeakers, offering precise, low-Q coverage. Arrayable and THX approved. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound CQ-2 narrow coverage
Meyer Sound CQ-2 narrow coverage main loudspeakers are arrayable with precise, high-Q coverage. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound 650-P high-power
Meyer Sound 650-P high-power subwoofers provide extended low-frequency power bandwidth. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound 700-HP ultrahigh-power
Meyer Sound 700-HP ultrahigh-power subwoofers are offered with or without rigging. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound MM-10 miniature
Meyer Sound MM-10 miniature subwoofers deliver expanded low-frequency headroom for applications that require excellent audio quality from a compact cabinet.
Meyer Sound MM-4XP self-powered
Meyer Sound MM-4XP self-powered miniature loudspeakers are designed for high-quality distributed systems.
Meyer Sound MM-4XPD directional
Meyer Sound MM-4XPD directional miniature self-powered loudspeakers are designed for high-quality distributed systems in highly reverberant spaces.
Meyer Sound MPS-481 48V DC power
Meyer Sound MPS-481 48V DC power supplies provide DC power for a single MM-4XP loudspeaker.
Meyer Sound MPS-488 external power
Meyer Sound MPS-488 external power supplies deliver 48V of DC power and balanced audio for up to eight MM-4XP loudspeakers.
Meyer Sound Stella-4C installation
Meyer Sound Stella-4C installation loudspeakers for use in Meyer Sound’s Constellation electroacoustic architecture.
Meyer Sound 600-HP compact
Meyer Sound 600-HP compact high-power subwoofers are available with or without handles, rigging, and RMS. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound Stella-8C installation
Meyer Sound Stella-8C installation loudspeakers for use in Meyer’s Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound Stella-188 18V DC power
Meyer Sound Stella-188 18V DC power supplies for use in Meyer's Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound SB-1 parabolic
Meyer Sound SB-1 parabolic long-throw sound beam speakers focus high-frequency fill energy over great distances.
Meyer Sound SB-2 parabolic
Meyer Sound SB-2 parabolic wide-range sound beam speakers are capable of high sound pressure levels with precisely defined narrow coverage.
Meyer Sound SB-3F sound field
Meyer Sound SB-3F sound field systhesis loudspeakers are designed for projecting mid- and high-frequency energy over distances up to 1km.
Meyer Sound 500-HP self-powered
Meyer Sound 500-HP self-powered subwoofers are designed to enhance the low-frequency headroom in a variety of full-range systems for fixed or touring applications.
Sales of Meyer Sound UPQ-1P
Sales of Meyer Sound UPQ-1P self-powered, wide coverage loudspeakers with symmetrical patterns that cover broad listening areas.
Sales of Meyer Sound UPQ-2P narrow
Sales of Meyer Sound UPQ-2P narrow coverage loudspeakers, offering extremely high power output and low distortion, as well as a focused beamwidth.
Meyer Sound UPA-1P compact wide
Meyer Sound UPA-1P compact wide coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.
Meyer Sound UPJunior ultracompact
Meyer Sound UPJunior ultracompact loudspeakers bring the sonic signature, flexibility, and extraordinary power-to-size ratio of the UPJ-1P to a smaller package.
Meyer Sound UPA-2P compact narrow
Meyer Sound UPA-2P compact narrow coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.
Meyer Sound MJF-212A high-power
Meyer Sound MJF-212A high-power stage monitors are designed to meet critical requirements in professional applications.