Warning: Last items in stock!
Meyer Sound M1D ultra-compact curvilinear array loudspeakers bring the singular advantages of self-powered line arrays to sound reinforcement applications in small and mid-sized venues.
DISCONTINUED - PAGE LEFT FOR REFERENCE
Features and Benefits of the Meyer Sound M1D
The Meyer M1D ultra-compact curvilinear array loudspeaker brings the singular advantages of self-powered line arrays to sound reinforcement applications in small and mid-sized venues. The exceptionally compact enclosure enables sound designers to achieve high output, precise pattern control with very low distortion from a lightweight and unobtrusive system. The M1D provides a substantial peak SPL of 125 dB at 1 meter with an operating frequency range of 60 Hz to 18 kHz and is designed specifically for implementing vertical curvilinear arrays of up to 16 cabinets having 0- to 8-degree splay between adjacent units. This design affords the flexibility to tailor vertical coverage by varying the number and splay of cabinets in the array while maintaining a consistent 100° horizontal coverage.
The M1D loudspeaker system comprises two 5-inch cone drivers and three 0.75-inch high-frequency metal dome tweeters with neodymium magnets. To assure the smoothest response in the critical midrange, the M1D incorporates a complex crossover design similar to that pioneered in Meyer Sound's UPM loudspeakers. At the lowest frequencies, both 5-inch drivers combine to reproduce powerful, coherent bass. In the mid frequencies, however, the crossover feeds the signal to only one driver; this technique eliminates interference between the two drivers (that would otherwise occur at shorter wavelengths) in order to maintain optimal polar and frequency response characteristics. The three vertically aligned dome drivers act as a small line array, focusing the sound into a tight vertical coverage pattern while the constant-directivity horn maintains broad horizontal coverage.
The bi-amplified M1D incorporates a complementary MOSFET power amplifier module with 500 watts total burst capability, together with active crossover and optimized frequency and phase response correction circuitry. An Intelligent AC power supply selects the correct operating voltage in the range of 90 to 264 V AC at 50 or 60 Hz, allowing international use without manually setting voltage switches. The Intelligent AC supply also performs protective functions to compensate for hostile conditions on the AC mains. Integral peak and rms limiters protect the loudspeaker components from over-excursion and over-heating.
The M1D's vented, trapezoidal cabinet is constructed from multiply hardwood and has a textured hard shell finish. The M1D incorporates QuickFly rigging as standard, and utilizes connecting links that are secured to the steel and aluminum rigging end frames by quick release pins. An ingenious arrangement of rigging holes allows quick and easy adjustment of cabinet splay for maximum freedom in customizing vertical coverage. The optional QuickFly MG-1D multipurpose grid allows either flying or ground stacking various combinations of M1D and M1D-Sub. Up to 16 M1Ds (or the equivalent weight of M1D and M1D-Sub) with a 7:1 safety factor may be flown, or up to eight M1Ds or four M1D-Subs may be ground stacked. For flying only, the simpler optional MTG-1D will support up to 16 M1Ds (or the equivalent weight of M1D and M1D-Sub) with a 7:1 safety factor.
M1D comes equipped with Meyer Sound's RMS remote monitoring system as standard. RMS allows the full range of operating parameters to be monitored over a network using a Windows computer.
No customer comments for the moment.
JBL VT4889-1 15 inch three-way line
JBL VT4889-1 15 inch three-way line array elements, designed to deliver high-quality reinforcement of music and speech in a variety of applications.
JBL VT4889ADP full-size powered
JBL VT4889ADP full-size powered three-way, high directivity line array elements and integrated audio systems.
JBL VT4880ADP powered fullsize
JBL VT4880ADP powered fullsize arrayable 2x 18-inch subwoofers are designed to deliver high quality reinforcement of VLF musical information.
JBL SRX718S 18 inch subwoofers, for
JBL SRX718S 18 inch subwoofers, for extended low-frequency output. DISCONTINUED
Sales of JBL SRX728S dual 18 inch
Sales of JBL SRX728S dual 18 inch woofers for extended low frequency output. Large vent area for reduced distortion. DISCONTINUED
Sales of JBL SRX738 18 inch
Sales of JBL SRX738 18 inch low-frequency drivers for extended low-frequency output. DISCONTINUED
Active subwoofers designed for
Active subwoofers designed for monitoring environments requiring an accurate low-frequency response down to 20Hz.
Meyer Sound CQ-1 wide coverage main
Meyer Sound CQ-1 wide coverage main loudspeakers, offering precise, low-Q coverage. Arrayable and THX approved. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound CQ-2 narrow coverage
Meyer Sound CQ-2 narrow coverage main loudspeakers are arrayable with precise, high-Q coverage. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound 650-P high-power
Meyer Sound 650-P high-power subwoofers provide extended low-frequency power bandwidth. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound 700-HP ultrahigh-power
Meyer Sound 700-HP ultrahigh-power subwoofers are offered with or without rigging. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound MM-10 miniature
Meyer Sound MM-10 miniature subwoofers deliver expanded low-frequency headroom for applications that require excellent audio quality from a compact cabinet.
Meyer Sound MM-4XP self-powered
Meyer Sound MM-4XP self-powered miniature loudspeakers are designed for high-quality distributed systems.
Meyer Sound MM-4XPD directional
Meyer Sound MM-4XPD directional miniature self-powered loudspeakers are designed for high-quality distributed systems in highly reverberant spaces.
Meyer Sound MPS-481 48V DC power
Meyer Sound MPS-481 48V DC power supplies provide DC power for a single MM-4XP loudspeaker.
Meyer Sound MPS-488 external power
Meyer Sound MPS-488 external power supplies deliver 48V of DC power and balanced audio for up to eight MM-4XP loudspeakers.
Meyer Sound Stella-4C installation
Meyer Sound Stella-4C installation loudspeakers for use in Meyer Sound’s Constellation electroacoustic architecture.
Meyer Sound 600-HP compact
Meyer Sound 600-HP compact high-power subwoofers are available with or without handles, rigging, and RMS. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound Stella-8C installation
Meyer Sound Stella-8C installation loudspeakers for use in Meyer’s Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound Stella-188 18V DC power
Meyer Sound Stella-188 18V DC power supplies for use in Meyer's Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE
Meyer Sound SB-1 parabolic
Meyer Sound SB-1 parabolic long-throw sound beam speakers focus high-frequency fill energy over great distances.
Meyer Sound SB-2 parabolic
Meyer Sound SB-2 parabolic wide-range sound beam speakers are capable of high sound pressure levels with precisely defined narrow coverage.
Meyer Sound SB-3F sound field
Meyer Sound SB-3F sound field systhesis loudspeakers are designed for projecting mid- and high-frequency energy over distances up to 1km.
Meyer Sound UP-4XP ultracompact
Meyer Sound UP-4XP ultracompact loudspeakers deliver high sound pressure levels, low distortion, and uniform directional control.
Meyer Sound 500-HP self-powered
Meyer Sound 500-HP self-powered subwoofers are designed to enhance the low-frequency headroom in a variety of full-range systems for fixed or touring applications.
Sales of Meyer Sound UPQ-1P
Sales of Meyer Sound UPQ-1P self-powered, wide coverage loudspeakers with symmetrical patterns that cover broad listening areas.
Sales of Meyer Sound UPQ-2P narrow
Sales of Meyer Sound UPQ-2P narrow coverage loudspeakers, offering extremely high power output and low distortion, as well as a focused beamwidth.
Meyer Sound UPA-1P compact wide
Meyer Sound UPA-1P compact wide coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.
Meyer Sound UPJunior ultracompact
Meyer Sound UPJunior ultracompact loudspeakers bring the sonic signature, flexibility, and extraordinary power-to-size ratio of the UPJ-1P to a smaller package.
Meyer Sound UPA-2P compact narrow
Meyer Sound UPA-2P compact narrow coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.