Get the lowest prices right now by calling
877 258-0563 or 303 258-0563



Meyer Sound X-800

Meyer Sound X-800

New

Meyer Sound X-800 high-power subwoofers are designed primarily to provide additional low-frequency headroom in applications requiring very high monitoring levels coupled with extreme low frequency transients.

Contact Sweetwave

 

Features and Benefits of the Meyer Sound X-800

  • High peak power yields excellent transient
    reproduction
  • Extended low frequency response down
    to 20 Hz
  • Extremely low distortion for ultimate clarity at low frequencies.
  • Exceptionally reliable and durable
 
Applications
  • Control room monitoring
  • Large-scale surround mixing
  • High-end playback systems
  • Soundtrack recording and mixing
  • Theatrical reproduction
 

The Meyer X-800 high-power studio subwoofer is designed primarily to provide additional low-frequency headroom in applications requiring very high monitoring levels coupled with extreme low frequency transients. An excellent supplement to any high-level studio monitor, the X-800 also provides an ideal complement to Meyer Sound's X-10 linear control room monitor.

The X-800 houses two Meyer Sound long excursion 18-inch drivers in a tuned, vented cabinet. The X-800 output rolls off well below 250 Hz, avoiding any adverse comb filtering effects that could be generated by the proximity of the dual drivers. A laser-trimmed differential input with high common-mode rejection enables long line-level signal runs using shielded, twisted-pair cable. As with all Meyer Sound self-powered products, onboard processing includes phase and frequency response correction filters and driver protection circuitry.

An integral two-channel class AB/H amplifier with complementary MOSFET output stages supplies a total peak output of 1240 watts. Each amplifier channel features TruPower® limiting technology to maximize loudspeaker reliability, minimize power compression and extend component life. An Intelligent ACT power supply affords automatic voltage selection, EMI filtering, soft current turn-on and surge suppression.

When used with the X-10, the X-800 is not intended to extend frequency response, as the X-10 is a full-range system. Rather, the X-800 extends low-frequency headroom by approximately 10 dB in the range from 25 Hz to the crossover point.

The companion X-01 crossover module optimizes overall system response and allows connection of single or dual subs for stereo or 5.1 surround operation. Crossover points are selectable at 120, 100 and 80 Hz, and a single switch allows quick changeover from"pure" X-10 monitoring to subwoofer
augmentation. A separate .1 channel input allows the system to be switched between stereo and 5.1 operation from the front panel; this switch can also be controlled remotely from the console. Though the sensitivity of the X-800/X-01 matches the X-10, the X-01 provides ±6 dB of gain to compensate for loading conditions.

The X-800 subwoofer's premium birch plywood cabinet is coated with a smooth medium-gloss black finish to match the X-10. It is optionally available in a durable textured finish, complete with four rubber feet on each bottom corner and matching cups on the top corners for secure, aligned vertical stacking. A removable protective cloth covered wooden frame is attached to the front. Custom colors are available. Meyer Sound's RMST remote monitoring system provides comprehensive system monitoring over a Windows-based network.

More info from Meyer Site:
X-800 : High Power Subwoofer
X-800 Datasheet

No customer comments for the moment.

Write a review

Write a review

Products In The Same Category

  • JBL VT4889-1 15 inch three-way line

    JBL VT4889-1 15 inch three-way line array elements, designed to deliver high-quality reinforcement of music and speech in a variety of applications.

  • JBL VT4889ADP full-size powered

    JBL VT4889ADP full-size powered three-way, high directivity line array elements and integrated audio systems.

  • JBL VT4880ADP powered fullsize

    JBL VT4880ADP powered fullsize arrayable 2x 18-inch subwoofers are designed to deliver high quality reinforcement of VLF musical information.

  • JBL SRX718S 18 inch subwoofers, for

    JBL SRX718S 18 inch subwoofers, for extended low-frequency output. DISCONTINUED

  • Sales of JBL SRX728S dual 18 inch

    Sales of JBL SRX728S dual 18 inch woofers for extended low frequency output. Large vent area for reduced distortion. DISCONTINUED

  • Sales of JBL SRX738 18 inch

    Sales of JBL SRX738 18 inch low-frequency drivers for extended low-frequency output. DISCONTINUED

  • Active subwoofers designed for

    Active subwoofers designed for monitoring environments requiring an accurate low-frequency response down to 20Hz.

  • Meyer Sound CQ-1 wide coverage main

    Meyer Sound CQ-1 wide coverage main loudspeakers, offering precise, low-Q coverage. Arrayable and THX approved. DISCONTINUED - PAGE LEFT FOR REFERENCE

  • Meyer Sound CQ-2 narrow coverage

    Meyer Sound CQ-2 narrow coverage main loudspeakers are arrayable with precise, high-Q coverage. DISCONTINUED - PAGE LEFT FOR REFERENCE

  • Meyer Sound 650-P high-power

    Meyer Sound 650-P high-power subwoofers provide extended low-frequency power bandwidth. DISCONTINUED - PAGE LEFT FOR REFERENCE

  • Meyer Sound 700-HP ultrahigh-power

    Meyer Sound 700-HP ultrahigh-power subwoofers are offered with or without rigging. DISCONTINUED - PAGE LEFT FOR REFERENCE

  • Meyer Sound MM-10 miniature

    Meyer Sound MM-10 miniature subwoofers deliver expanded low-frequency headroom for applications that require excellent audio quality from a compact cabinet.

  • Meyer Sound MM-4XP self-powered

    Meyer Sound MM-4XP self-powered miniature loudspeakers are designed for high-quality distributed systems.

  • Meyer Sound MM-4XPD directional

    Meyer Sound MM-4XPD directional miniature self-powered loudspeakers are designed for high-quality distributed systems in highly reverberant spaces.

  • Meyer Sound MPS-481 48V DC power

    Meyer Sound MPS-481 48V DC power supplies provide DC power for a single MM-4XP loudspeaker.

  • Meyer Sound MPS-488 external power

    Meyer Sound MPS-488 external power supplies deliver 48V of DC power and balanced audio for up to eight MM-4XP loudspeakers.

  • Meyer Sound Stella-4C installation

    Meyer Sound Stella-4C installation loudspeakers for use in Meyer Sound’s Constellation electroacoustic architecture.

  • Meyer Sound 600-HP compact

    Meyer Sound 600-HP compact high-power subwoofers are available with or without handles, rigging, and RMS. DISCONTINUED - PAGE LEFT FOR REFERENCE

  • Meyer Sound Stella-8C installation

    Meyer Sound Stella-8C installation loudspeakers for use in Meyer’s Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE

  • Meyer Sound Stella-188 18V DC power

    Meyer Sound Stella-188 18V DC power supplies for use in Meyer's Constellation electroacoustic architecture. DISCONTINUED - PAGE LEFT FOR REFERENCE

  • Meyer Sound SB-1 parabolic

    Meyer Sound SB-1 parabolic long-throw sound beam speakers focus high-frequency fill energy over great distances.

  • Meyer Sound SB-2 parabolic

    Meyer Sound SB-2 parabolic wide-range sound beam speakers are capable of high sound pressure levels with precisely defined narrow coverage.  

  • Meyer Sound SB-3F sound field

    Meyer Sound SB-3F sound field systhesis loudspeakers are designed for projecting mid- and high-frequency energy over distances up to 1km.

  • Meyer Sound UP-4XP ultracompact

    Meyer Sound UP-4XP ultracompact loudspeakers deliver high sound pressure levels, low distortion, and uniform directional control.

  • Meyer Sound 500-HP self-powered

    Meyer Sound 500-HP self-powered subwoofers are designed to enhance the low-frequency headroom in a variety of full-range systems for fixed or touring applications.

  • Sales of Meyer Sound UPQ-1P

    Sales of Meyer Sound UPQ-1P self-powered, wide coverage loudspeakers with symmetrical patterns that cover broad listening areas.

  • Sales of Meyer Sound UPQ-2P narrow

    Sales of Meyer Sound UPQ-2P narrow coverage loudspeakers, offering extremely high power output and low distortion, as well as a focused beamwidth.

  • Meyer Sound UPA-1P compact wide

    Meyer Sound UPA-1P compact wide coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.

  • Meyer Sound UPJunior ultracompact

    Meyer Sound UPJunior ultracompact loudspeakers bring the sonic signature, flexibility, and extraordinary power-to-size ratio of the UPJ-1P to a smaller package.

  • Meyer Sound UPA-2P compact narrow

    Meyer Sound UPA-2P compact narrow coverage loudspeakers provide high power output, low distortion and consistent polar response in a compact enclosure.

Next Previous


McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams Trusted Commerce Member of infoComm InternationalProud member of NAMM
Scroll